Filter
Top Products
16
Receiving calls
1
Phone rings.
2 Press . "Talk" and volume
appears on the display.
3 The call-time display starts. Talk with
the caller.
mute/ring
flash
Calling
Talk
Talk 0:02
talk
Auto Talk when ringing
When the Auto Talk setting is on and there is an incoming call, simply lift the handset
from the base unit to answer the phone. (See page 31.)
Any key when ringing
When the Auto Talk setting is on, and the handset is on the base, press any handset
key (except ) to answer the incoming call. (See page 31.)
Mute when ringing
Press when the phone rings to mute the ringing sound.
The handset rings normally with receipt of the next call.
Any key when paging
To cancel paging, press any of the handset keys while the handset is beeping. (See
page 30.)
Caller ID reception — Note: You must subscribe to Call Waiting service from your local
phone company to use this feature.
When a call is received during a telephone call already in progress,
the handset enters
call waiting mode and Caller ID data displays
.
Press
to switch to the new call
. (See page 38.)
mute/ring
mute/ring
flash
4 Press or place the handset on the base
when the telephone call is finished. The call
time will be displayed for about 5 seconds.
talk
115:35
EXLI 8962 6th 99.8.20 3:26 PM Page 16