Filter
Top Products
On the handset you want to register:
Enter the base PIN code. Pre-set base PIN code is 0000.
You will hear a confirmation tone when registration is complete.
When in standby mode, the new handset number will be
displayed. The handset will automatically be allocated with the
next available handset number.
If registration is unsuccessful, the display will show Not Registered
and you will need to follow the registration procedure again.
De-register a Handset or a Base
If you have more than one handset registered to your base or
more than one base registered to your handset(s), you can de-
register both the handset from the base or the base from the
handset. Before deregistering, make sure all handsets and the
base are in standby mode.
1 Press to access the main menu.
2 Press or until
Add. Settings
is displayed and press .
3 Press or to display
Deregister
and press .
4 Press or to select
Handset
or
Base
and press .
5 Press or to display the handset or base you want to
de-register and press .
6 Press or to select
Yes
and press .
If the handset has been registered to the base successfully,
you will hear a confirmation tone.
7 Press to exit and return to standby.
• You can register a handset to up to 4 bases, e.g. one at
work and one at home, and switch between them.
[5]
UU01499BA_0 8/9/06 2:38 PM Page 5