Filter
Top Products
---
OPERATION' . C. \~
Receiving a call
The unit is continuously in receive mode when the unit
is turned ON. When you receive a call, the TXjRXLED
will light up green and the Receive icon will be dis-
played.
Transmitting a call
1. Push and hold the PTTbutton to transmit. The LED
indicator will light up red and the TXicon will
appear on the LCDdisplay.
2. While pressing the PTTbutton, speak in a normal
voice about 2-3 inches away from the microphone.
3. Release the PTTbutton when you are finished
speaking and listen for a reply.
NOTE: In order for others to receive your message
I
they must be on the same channel that you
are using. See "Changing Channels"
for more information.
Changing Channels
The UHO45XRradio uses the first 19 channels of the
UHFCB Band.
To change channels;
1. Press and hold the MODE key until a beep is heard
and the channel number flashes on the display.
2. While the channel number is flashing,
. Press the UP (A.)key to increase the channel
number.
. Press the DOWN (T) key to decrease the
channel number.
3. Press the MODE key twice or the PTTbutton to
select the desired channel.
11