Uniden UHO45XR Two-Way Radio User Manual


 
-, " 'BELT CLIP r, '-
Installing the belt clip:
1. Slide the belt clip into place in the belt clip slot as
shown in figure 4.
2. Ensure that the clip locks in place by listening
for a "click",
Removing the belt clip:
1. Pull the belt clip latch away from the unit as shown
in figure 5.
2. While pulling the latch, push up on the belt clip to
remove it from the radio.
Belt Clip latch
BeltClip
Belt Clip Slot
(Rear View)
(Figure4)
(Figure5)
OPERATION
Turning the unit ON I OFF
.Turn the Volume Knob clockwise. The unit will
"beep" and the display will appear.
. Turn the unit off by rotating the Volume knob
counter-clockwise until you hear a "click".
Adjusting the volume
.Press and hold the monitor button and adjust the
volume to desired level.
10