Filter
Top Products
Operation
UNIDEN UHF CB Transceiver
11
Operating the uh088sx in Duplex Mode
Scanning
Open Scan (OS) Mode
For this example we are adopting CH01 as the channel
being used in your area for repeater use.
Press to switch Duplex On. The duplex icon DUP appears.
If Duplex is not required - press again to switch Duplex off.
Only channels 01 - 08 are available for Duplex
The uh088sx has a scanning feature that allows you to
search for active channels automatically.
Furthermore, the is designed to have two types
of scanning; Open Scanning (OS) and Group Scanning
(GS), to give you flexibility and allow you to use the radio
more effectively. Press and scanning starts.
The scan icon SCN appears.
Allows continuous scanning of channels stored in the Open Scan memory. If an active channel is found, scanning
will stop on that channel.
This example shows CH40 active.
If the received signal ceases, the unit will wait 3 seconds for the signal
to return, otherwise scanning resumes.
To skip the active channel, press momentarily. Scanning resumes.
To deactivate scan, press while scanning
or the PTT button on the microphone.
Check with your local Retailer to
determine if there is a Repeater in your
area.
If SCAN is deactivated while on an
active channel, the uh088sx will stay
on that active channel. If no channels
are active, the uh088sx will reinstate
the starting channel.
uh088sx