Filter
Top Products
– 5 –
For Backward Compatible Base Models - ELT560 and the TRU8 Series
[TRU8860/TRU8865/TRU8880/TRU8885/TRU8888]
1
Disconnect the AC adapter from the main base.
2
While pressing down on the following key, reconnect the AC
adaptor.
TRU8860/8865 models - find handset key
TRU8880 models - find hs/intercom key
TRU8885 models - flash/find hs key
Keep pressing the key until the CHARGE LED starts to blink.
For ELT560
1 Remove the battery compartment
cover from the back of the main
base.
2 Press and hold the Registration
button in the battery compartment.
3 Keep pressing the Registration
button until the handset charge
LED on main base starts to blink.
For TRU8888 (corded base model)
1 With the main base in standby mode (i.e. not being used), press
the MENU soft key on the base.
2 Use the up/down key to select
HS Registration
, and then
press the OK soft key.
3 Use the up/down key to select
Register Handset
.
4 Base LCD screen will display the following prompt:
On handset press & hold "#" key for 2 sec
3
On the handset, press and hold the # key until you hear a beep.
For Main Base Models ELBT585, ELBT595
1
With the main base in standby mode (i.e. not being used), press
menu/select.
2
Use the up/down key to select
System Setup
.
3
Use the up/down key to select
Register Handset
.
4
The base LCD screen will display the following prompt:
On handset, press & hold "#" key for 2 sec
5
On the handset, press and hold the # key until you hear a beep.
Registration
button
UU893BH_TCX440.fm Page 5 Monday, September 5, 2005 11:49 AM