Filter
Top Products
For 'Call Waiting' to
operate you must
subscribe to this service
through your local
telephone company.
If you do not have this
service, then pressing
the flash button during a
call may disconnect the
caller.
FLASH
FLASH
Ring Volume (Hi/Lo/Off)
Ring Pitch (Hi/Lo)
Regular dialling
Redial function
Last 10 number redial
Pause function
Mute button
Handset Volume (Hi/Lo)
Flash button - Call Waiting
Set the ring volume switch to the desired level (Hi, Lo or Off). The maximum level is Hi. The
switch is located at the back of the unit.
Set the ring pitch switch to the desired level (Hi or Lo). The switch is located at the back of the
unit.
Lift the handset and listen for dial tone. Then enter the telephone number you wish to call. The
dialled number will appear on the display screen whenever you make a call.
To redial the previous number you called. Lift the handset or press and then press .
1. With the handset on the cradle press .
2. Press or to review the last 10 numbers dialled.
3. Pick up the handset or press to dial the selected number.
To insert a temporary pause. Press the /pause button during a dialling sequence. For
example, in some cases when dialling an international number you need to place a pause between
the clusters of numbers to allow the telephone company, relaying the call, time to process it. The
number 011-886-22-795-1234 would need to be dialled 011 /pause 886, /pause
22, /pause795, /pause 1234.
For privacy when you are required to consult with a person standing next to you and do not wish
the party on the line to hear your conversation, press . MUTE will be displayed. Press
again to resume the conversation.
Set the handset volume switch to the desired position (Hi or Lo). The switch is located at the back
of the unit.
New Zealand:
Australia:
If the Call Waiting tone sounds while you are on a call -
Press the button to switch between callers.
Press then to switch between callers.
To switch your call to speaker phone, press and hang up the handset. To switch
back, simply pick up the handset and speak. You can make, receive and dial in the
speaker mode.
During the conversation, you can move the slide control on the right hand side of the
unit to adjust the speaker volume.
Speaker Button
Speaker Volume
REDIAL
REDIAL
REDIAL
REDIAL
REDIAL
MUTEMUTE
REDIAL
REDIAL
TELEPHONE KEY and SWITCH FUNCTIONS