Filter
Top Products
1. Plug one end of the
Handset Cord (curly) into
the Handset and the other
end into the jack on the
side of the telephone.
2. Plug one end of the line
cord (straight) into the
telephone line jack on
the back of the telephone
and the other end into the wall outlet.
● Never install telephone wiring during a lightning storm.
● Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected.
● Use caution when installing or modifying telephone
lines.
Note: Most phone equipment available now uses modular jacks.
Phone cords are fitted with a molded plastic connector
which plugs into this type of jack. If you do not have a
modular phone jack, contact your local telephone company
for information about their installation.
INSTALLATION
5
INSTALLING
YOUR PHONE