Filter
Top Products
▼ Storing One-Touch Memories
To program One-Touch Memories (1-5).
1. Pickup the Handset.
2. Press
memory button.
3. Enter telephone number that you
want to program.
4. Press the
memory button.
5. Press the desired speed dial button
(1-5).
▼ Pause
During the memory storage procedure you may enter a 4 second
delay between numbers (for accessing a switchboard, or long
distance service) by pressing the pause button at the point in the
number sequence you wish to pause. The pause button counts as
one digit. Pressing pause more than once will increase the length
of the pause between numbers.
▼ Memory Storage Card
When you have programmed a number into the speed dial memory,
write the name of the person on the Memory Storage Card
(supplied).
▼ Dialing Numbers from Memory
1. Pick up Handset.
2. Press desired one touch speed dial button.
Note: Make sure to complete the storing of numbers in memory within
8 secs. Otherwise, the unit exits programming state (you will hear
a series of beep tones). In this case, repeat steps 1-5.
11
memory mute
pause flash redial
USING YOUR FP104