Filter
Top Products
18
USING YOUR FP101
USING YOUR FP101
PLACING A TELEPHONE CALL
1. Remove the Handset from the Base.
2. Press the keypad buttons to dial the phone number you want.
3. After you have completed the phone call, place the Handset back on the Base.
REDIAL
If you want to redial the last number dialed, simply pick up the Handset
then press the button. The telephone will automatically redial the last
number dialed.
RECEIVING A TELEPHONE CALL
When the phone rings, pickup the Handset from the Base and begin the
conversation.
ACCESSING THE CALL WAITING SERVICE USING THE
CALL WAITING BUTTON (New Zealand Model only)
While talking you hear the Call Waiting beep signal.
Press the button. This feature sends a 600mS timed “hook-flash”
on the telephone line for accessing services such as Call Waiting, etc.
ACCESSING THE CALL WAITING SERVICE USING THE
CALL WAITING BUTTON (Australian Model only)
1. While talking, you hear the call waiting signal (series of beep tones).
2. Press the button then to switch call and put the current
call on hold.
3. To switch back to original call, press the button then .
NOTE: You must subscribe to Telecoms Call Waiting Service before you can use this feature.
NOTE: The + call waiting procedure toggles call between the
incoming and the original call (vice versa). The +
procedure will drop the current call connection and pick up the incoming call or
the call on hold.
FP101-OM.qxd 7/12/98 09:12 Page 18