Filter
Top Products
16
Using Special Features
Using Do Not Disturb
The Do Not Disturb or DND feature turns off the audio ringers of the
base and all handsets at the same time. It does not affect any of the
visual ringers.
With the phone in standby, press and hold
DO NOT DISTURB
on the base.
The phone automatically turns on the answering system and shows
Do
Not Disturb
in the display on all handsets.
To cancel, press
DO NOT DISTURB
.
If you turn the answering system off while DND is on, the phone
turns off DND along with the answering system.
Adjusting the Base Visual Ringer
The
VISUAL RINGER
switch is at the back
of the base; use this switch to change
the brightness of the base visual ringer.
(It doesn't affect the audio ringers.)
Slide the switch so that its center
(marked with the arrow in the picture)
lines up with the brightness you want to
use:
HIGH
,
LOW
, or
OFF
.
Using the Audio Boost
You can increase the earpiece volume for normal calls and intercom calls.
During a call, press
BOOST
to increase the volume of the audio. While
audio boost is on, appears in the display. Press
BOOST
again to turn off.
Using Text-To-Speech
With the Text To Speech (TTS) feature, your phone can announce phone
numbers or names in several different situations.
When you... (from standby) The phone announces...
Receive a call The caller's name (if sent by a Caller ID service)
Dial a number The phone number you dialed
Open the phonebook The name of the entry you are looking at