Filter
Top Products
[ 11 ]GETTING STARTED
INSTALLING AND
ADJUSTING
GETTING STARTED
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1)Plug the AC adapter into the
DC IN 9V jack.
2)Wrap the AC adapter cord inside the molded wiring
channel as shown.
3)Plug the AC adapter into a standard 120V AC
wall outlet.
4)Place the handset on the base unit and charge for
15-20 hours.
5)Plug the telephone line cord into the
TEL LINE jack.
Wrap the cord inside the molded wiring channel
as shown.
Mounting the Base Unit on a Wall
DO NOT use an outlet
controlled by a wall
switch.
Setting the handset retainer clip for wall mounting
1)On the base unit, pull the handset retainer clip out of the
slot and rotate it clockwise 180 degrees.
2)Flip the retainer clip from front to back. Slide it back
into the slot so that the lip of the retainer is up and
the
▼ is down. The retainer holds the handset in place.
If you have wall
mounted the base, you
have to remove the
belt clip to hang the
handset with the
display facing forward.
EXT1160/1165 ENG-0726 7/26/01 15:53 Page 11