Filter
Top Products
8. On the base unit, pull the handset
retainer out of the slot. Rotate it
clockwise 180 degrees.
9. Flip the retainer from front to back.
Slide it back into the slot so that
the lip of the retainer is up and the
is down. The retainer holds the
handset in place.
7
Before you plug the other
end of the telephone cor
into the modular jack on
the wall, charge the
battery (See CHARGING
THE BATTERY PACK,
page 10).
7
If the handset beltclip is
attached, you cannot
charge the handset facing
forward when the phone
is mounted on the wall.