Filter
Top Products
35
If the handset battery pack
is completely discharged
or the battery pack is
removed, the digital
security code will be lost.
If this happens, a new
security code is set
automatically next time
the battery pack is
charged.
ADDITIONAL
INFORMATION
The digital security code is an identification code used to connect
the handset and the base unit. Normally, setting the code is not
necessary.
The first time you charge your handset, the security code is
automatically set. (See page 3.)
In the rare situation that you suspect another cordless telephone
is using the same security code, you can change the code.
1 Remove the handset from the base
unit. Press and hold .
2 While the handset is producing the
paging sound, hold and
replace the handset on the base unit.
The paging tone stops.
Leave the handset on the base
longer than 5 seconds. A random,
new security code is set.
open
backup battery
page/find
power
status
DIGITAL
SPREAD
SPECTRAM
900MHz
page/find
Changing the digital security code
page/find
EXS 9960 4th 99.8.20 4:08 PM Page 38