Filter
Top Products
12
Other Operations
To Do this
To adjust the earpiece volume Press or .
To temporarily switch to tone dial Press . The following
(When the base is set to pulse numbers will be sent as
mode) tone dialing.
To enter a pause within dialing Press .
sequence
To improve the reception Press .
“Scanning” appears on the
display. If the operation fails,
the error tone sounds.
3 The number is dialed. After
about 5 seconds, the call-time
display appears.
4 To hang up, press or
place the handset on the base.
The call-time will be
displayed for about 5 seconds.
Dialing from standby
1 Enter the phone number. (Up to 32
digits.)
Example: Enter 8178583300
2 Press . “Talk” flashes on the
display.
Then the volume setting is displayed.
For example, if the volume is set to
high, the display shows:
You must press a key
within 20 seconds, or the
phone will return to
standby.
BASICS
8178583300
Talk
8178583300
Talk
<High>
Talk 0:00
8178583300
5:15
Press if you enter a
wrong number at the
step 1.