Filter
Top Products
10
Charge the battery pack for 15-20 hours before you start using
your phone.
1 Press in on the battery cover
release and slide the cover
down until it comes off.
2 Connect the battery pack
connector with the correct
polarity (black and red wires),
then insert the battery pack
into the battery compartment.
3 Securely close the battery
compartment cover by
sliding it up until it snaps
into place.
4 Place the handset on the
base.
5 Make sure that the “
status
”
LED lights. If the LED
doesn’t light, check to see
that the AC adapter is
plugged in and that the
handset makes good contact
with the base charging
contacts.
Preparing the battery pack
Use only Uniden Battery (BT-905) supplied with your
phone.