Filter
Top Products
CHARGING THE BATTERY PACK
▼
Initial battery charging
Before plugging the phone line into your new phone for the first time,
fully charge the battery pack for 15-20 hours without interruption.
1) Place the handset on the base.
2) Make sure that
status
LED lights. If the LED doesnt light, check to see
that the AC adapter is plugged in and that the handset makes good
contact with the base charging contacts.
▼
Charging optional battery packs
The base unit of your phone is equipped with a compartment for
charging an extra battery pack for use in your handset. You can
obtain an extra battery pack from your authorized Uniden dealer.
1) Position the battery pack so the inner side with contacts is facing up.
2) Slide the battery pack into the
charging compartment until it
clicks into place.
3) Charge the battery for 24 hours. When charging is complete, pull up
on the latch to remove the battery pack. To install the charged battery
into the handset, refer to "Installing the Handset Battery Pack,"
page 10.
11
INSTALLING AND ADJUSTING
NOTE
Please visit your
authorized Uniden dealer
to obtain an extra battery
pack or contact the Uniden
parts department at
(800)554-3988. Hours are
from 8:00 a.m. to 5:00 p.m.
Central Time, Monday
through Friday.
!
In the event of a power failure, your spare battery pack
can be used as a back-up power supply for the base unit.
C:\LaDonna\Exs9600\EXS9600.vp
Tue Dec 01 11:28:38 1998
Color profile: Disabled
Composite Default screen