Filter
Top Products
20
Your EXL 8945 stores up to 10 numbers in handset plus 10
numbers in the base.
On the handeset
1 Press and hold in the
standby mode.
2
Enter the number you wish to store
(up to 20 digits)
3
Press again.
4 Press the to on the keypad
to select the memory location you
wish to store the number.
5 The confirmation beep indicates the
number has been stored.
memory
0
9
You must press a key
within 20 seconds or the
phone will return to
standby. If you return the
handset to the cradle, the
phone will return to
standby too. Press
and you can
go to memory menu at
any time.
1 Press .
The
status
LED blinks.
2 Dial the number you wish to store.
3 Press .
Press to on the keypad to
select the memory location you wish
to store the number.
The
status
LED goes out.
A confirmation beep indicates the
number is stored.
On the base
memory
status
LED
Storing phone numbers
memory
MEMORY
DIALING
memory
memory
0 9
NOTES
When entering numbers, you may press to
enter a pause in the dialing sequence.
redial/p
NOTES
You cannot store phone numbers directly into the
one-touch dial keys. See page 21 for one touch
dialing.
EXL 8945 5th 99.8.20 2:34 PM Page 23