Filter
Top Products
10
Charge the battery pack for more than 12-15 hours before you start
using your phone.
1 Press the battery cover release.
2 Connect the battery pack
connector with the correct
polarity (black and red wires),
then insert the battery pack
into the battery compartment.
3 Slide the battery cover forward
until it snaps into place.
4 Place the handset on the base.
Make sure that the
“
status
”
LED of the base unit lights, and
charging begins. Charge the
battery for at 12-15 hours.
You can place either side up
for charging the battery.
status
LED
Red
Black
Use only Uniden Battery
BT-905.
Preparing the battery pack
EXL 8945 5th 99.8.20 2:33 PM Page 13