Filter
Top Products
Automatic Digital Code Security
To avoid unauthorized calls on your phone, a Digital Code feature was added
to the
EXI 916/917
phone. This Digital Code is shared only between the Handset
and Base Unit. The Code is set automatically when you first use the phone.
✻
Please refer to the foldout in front of your operating guide for key positions.
To change the Digital Code:
1. Place the Handset in the Base Unit.
2.
Press the
page/find
button on the Base Unit.
The Handset begins beeping.
3. Remove the Handset from the Base
Unit while it’s still beeping.
When the beeping stops, wait 5
seconds, then return the Handset to
the Base Unit.
The charge LED on the Base Unit will
blink to indicate that the Digital
Security Code is set to one of the more
than 65,000 codes.
✻
If the Base Unit loses power while the Handset is off the Base, the Digital Code
may be erased. When this happens, the Handset will not function.
To reestablish communication between the Handset and Base Unit:
1. Restore power to the Base Unit.
2. Place the Handset back on the Base Unit.
3. The Charge LED on the Base Unit will blink to indicate that the Digital
Security Code is set.
24
C:\MANUALS5\exi916_7\exi916e.vp
Fri Oct 30 16:27:47 1998
Color profile: Disabled
Composite Default screen