Filter
Top Products
Sheet 8
Use the number keypad to enter the phone number. Press [select/
channel] when you’re nished. The handset sounds a conrmation tone
and displays MEMORY STORED.
The number can be up to twenty digits.
If this phone number is a long distance call, be sure to include the “1”
in front of the phone number.
If you need the phone to wait before dialing the next digit (for example, to enter an extension number
or access code), press [redial/pause] to insert a two-second pause between digits. The display shows
a P where the phone will pause. You can add as many pauses as you want anywhere in the phone
number, but each pause does count as a digit.
After a few seconds, the handset goes back to the phonebook list. Use [ ] and [ ] to select another
phonebook entry.
OR
Press [ /memory] to exit the phonebook. The phone returns to standby.
6-2. Finding Phonebook Entries
If you know the number of the phonebook entry you're looking for:
Press and hold the number key (0 through 9) assigned to that phonebook entry.
The handset displays the name and phone number saved for that phonebook entry. If the entry has no
number, the handset displays : <EMPTY> PRESS SELECT TO EDIT.
If the number you picked wasn't the right phonebook entry, just use [ ] and [ ] to scroll through the
phonebook entries. Stop scrolling when you see the phonebook entry you want.
If you don't know the number of the phonebook entry you're looking for:
Press [ /memory] to open the phonebook list.
Use [ ] and [ ] to scroll through the phonebook entries. Stop scrolling when you see the phonebook
entry you want.
6-3. Making a Call from the Phonebook
With the phone in standby, nd the phonebook entry you want to call (See section 6-2 on Finding Phonebook
Entries). Then press [TALK/ash] or [ ] to dial the number.
You can also press [TALK/ash] or [ ] and then nd the phonebook entry you want to call, and press
[select/channel].
6-4. Editing a Number in the Phonebook
With the handset in standby, nd the phonebook entry you want to edit (See section 6-2 on Finding
Phonebook Entries).
Press [select/channel] to open the MENU screen.
On the MENU screen, use [ ] to move the pointer to EDIT MEMORYXX, and press [select/channel].
The handset takes you to the STORE NAME screen from Step 2 of section 6-1 on Entering a New Number into
the Phonebook: just follow the same steps from there.
6-5. Deleting a Number from the Phonebook
With the handset in standby, nd the phonebook entry you want to delete (See section 6-2 on Finding
Phonebook Entries).
Press [select/channel] to open the MENU screen.
On the MENU screen, use [ ] to move the pointer to DELETE MEMORYXX, and press [select/channel]. The
handset asks you to conrm.
To delete the entry, use [ ] to move the pointer to YES and press [select/channel]. The handset sounds a
conrmation tone and goes back to the phonebook list.
OR
If you changed your mind, leave the pointer at NO and press [select/channel]. The handset goes back to the
phonebook list.
6-6. Storing Caller ID Records in the Phonebook
With the phone in standby, press [cid/menu].
Use [ ] or [ ] to nd the Caller ID record you want to save.
Note:
Remember, the phone stores the digits exactly as they appear on the display. If you need to add or delete a
"1" from the displayed phone number, press [1]. (You can always go back and edit the phone number later.)
Press [ /memory] to open the phonebook.
Find the phonebook entry number you want to use (See section 6-2 on Finding Phonebook Entries).
Press [select/channel] to store the Caller ID information to the phonebook and return to the Caller ID list.
Note: If this number already has a phonebook entry saved to it, the handset asks if you want to replace the
existing entry. Select YES to replace the existing entry with the new one, or select NO to cancel and keep
the existing entry. The display returns to the Caller ID list.
6-7. Chain Dialing
If you often have to enter a series of digits or some type of code number during a call, you can save that code
number to a phonebook entry. When your call connects, just use the phonebook speed dial to transmit the
saved code number. (This is referred to as chain dialing.)
Enter the code number (up to twenty digits) into the phonebook (See section 6-1 on Entering a New Number
into the Phonebook). Be sure to enter the code number into the phonebook exactly as you would enter it
during a call.
During a call, when you hear the prompt that tells you to enter the code number, press [ /memory] to
open the phonebook.
Find the phonebook entry number you want to use (See section 6-2 on Finding Phonebook Entries).
Press [select/channel]. The phone sends the digits of the code number exactly as you saved them in the
phonebook entry.
4)
•
•
•
5)
•
•
•
•
1)
2)
3)
4)
1)
2)
3)
4)
1)
2)
3)
4)
5)
1)
2)
3)
4)
Store Number
8007303456｡
Store Number
8007303456｡