Filter
Top Products
5
Notes: • For best results, wipe off dirt or shake water from handset
before placing in the charging cradle.
• Due to the magnetic inductive charging used with this model
the bottom of the handset might be warmer than room
temperature when you rst remove it from the charging cradle.
However, the warmth should not be excessive or
uncomfortable to touch.
•
Do not place the power cord where it creates a trip hazard or
where it could become chafed and create a re or electrical hazard.
Caution:
Keep magnetic items away from the handset.
Don’t place the handset where it will be subjected to direct
sunlight for long periods of time.
Registering the Handset
If you have purchased this accessory handset separately, it must
be registered to the base before you can use it.
Notes: •
The handset must be fully charged before attempting to register.
• Only one handset can be registered at a time.
Handsets that have not been registered display:
If the other base has an LCD display:
•
With the phone in standby, press [Menu/Select] on
the base. Press [ ] to move the cursor to REGISTER
HANDSET and then press [Menu/Select]. HANDSET
REGISTERING appears.
If the other base does not have an LCD display:
•
Disconnect the base AC adapter. Then press and hold
[nd hs] or [nd] while you reconnect the adapter. Keep
pressing [nd hs] or [nd] until the charge/in use LED
starts to blink.
On the handset, press and hold [#] until the handset beeps
and displays HANDSET REGISTERING.
When the handset nishes registering, it shows
REGISTRATION COMPLETE in the display.
-
-
1)
2)
3)