Filter
Top Products
[43]
Making a DirectLink Call
Exiting DirectLink Operation
Making an Intercom Page
1. To call another handset with DirectLink communication, press .
2. The display shows TO DIRECTLINK A HANDSET PRESS .
3. Press the number of the handset you want to call. If the handset is out of range or not using DirectLink
communication, the display shows UNAVAILABLE. To answer a DirectLink call, press or if Any Key
Answer is on, press any key of the twelve-key pad.
4. To exit the DirectLink call, press .
To exit DirectLink communication and return to normal standby, press and then press or
return the handset to the cradle. DIRECT LINK MODE CANCEL appears in the display
You can use the intercom to talk to another station without using the phone line.
[ /flash]
[1-4]
[ /flash]
[]
[menu/clear] [select/ ]
Note:
Intercom paging will be cancelled if any of the following things occur:
You receive an outside call or an intercom page while selecting the other handset.
You do not select a handset within 30 seconds.
The party does not answer the page within one minute.
The party is busy.
The party is out of range (UNAVAILABLE appears on the display).
.
1. With the phone in standby, press .
2. Use or to select the station you want to talk with, then press .
Select ALL to page all other stations paged.
3. To cancel the intercom page, press .
[xfer/intercom]
[ ] [ ] [select/ ]
[]