Filter
Top Products
The c.wait procedure
toggles between the incoming
and original call (vice versa).
The flash + 2call waiting
procedure toggles between
the incoming and original
call (and visa versa).
The flash + 1 procedure
will drop the current call
connection and pick up the
incoming call on hold.
In New Zealand you must
subscribe to Telecom’s Call
Waiting Service before you
can use this feature.
21
▼ For Australian Version
Using the c.wait feature
Please call your local telephone service provider to check the availability of this
service in your area.
1. While talking you hear the Call Waiting signal.
2. Press
c.wait button.
3. The existing call is placed on hold.
4. Talk to the second caller.
5. Press
talk button to end the current call.
6. The phone will ring back indicating
that the first caller is still on hold.
7. Press
talk button to answer this call.
8. Press
talk button to end the call.
Using the Flash Key
To access Telstra’s Call Waiting Service, you can either use the
c.wait button or
the
flash key.
1. While talking you hear the Call Waiting signal.
2. Press
flash then 2 to switch call and put the current call on hold.
3. To switch back to your original call, press
flash then 1.
▼ For New Zealand Version
Using the c.wait or flash key
1. While talking you hear the Call Waiting beep signal.
2. Press
c.wait or the flash key. This feature sends a 600ms timed
“hook-flash” on the telephone line for accessing services such as
Call Waiting etc.
To locate the handset when it is off the
base, press
page on the base. The handset
beeps for about 15 seconds.
Press talk on the handset
twice to stop the beeping.
PAGE
c.wait
flash
CALL WAITING
USING YOUR PHONE