Uniden DECT Elite 9035 Telephone User Manual


 
4343
Setting Up the
Answering System
4444
Setting Up the Answering System
You can set up your answering system’s features from the handset. Only one handset at a time can access the
answering system menus.
Note:
If you have multiple bases, select the base with answering system you want to access (see page 14).
Recording a Personal Greeting
Your answering system comes with a pre-recorded outgoing message or greeting
that plays when you receive a call: “Hello, no one is available to take your call. Please
leave a message after the tone.” You can record your own personal outgoing greeting.
Your recorded greeting must be between two seconds and thirty seconds long.
Press [
/mute]. The system announces the number of new and old messages,
then starts to play the messages unless it has no messages.
Press [5] to stop the announcements or message playback. You will hear
intermittent beeps indicating that the system is in the command waiting mode.
Press [8] to start the recording. The system announces, “Record greeting.” Begin
recording after the announcement.
When you nish recording, press [8] again or press [5]. You will hear a conrmation tone, and your recorded
greeting plays back for you.
Selecting a Greeting
Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can
also switch back and forth between the pre-recorded greeting and your own greeting at any time.
Press [
/mute]. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press [5] to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
1.
2.
3.
4.
1.
2.
1:Repeat
2:Play
3:Skip
4:Delete
5:Stop
6:SelectGreeting
8:RecNewGreeting
1:Repeat
2:Play
3:Skip
4:Delete
5:Stop
6:SelectGreeting
8:RecNewGreeting
DECT ELITE OM.indb 43 3/14/08 1:35:21 PM