Filter
Top Products
13
Installing the Phone
14
When the handset has registered to the base, the LCD will display REGISTRATION COMPLETE then show the
handset ID number.
If the display shows REGISTRATION FAILED, repeat the process again.
Note: If a handset has ever been registered to a base, reset the handset before you register it to a new base (see
Resetting the Handset on page 55). Or to use multiple bases, see the next section.
Using Multiple Bases
The handsets supplied with your phone (or any DECT Elite 9005 accessory handsets) can be registered to a
total of four different bases. Compatible bases include the DECT Elite 9035 series, DECT 6015 series and DECT
6035 series models. Once your handset is registered to more than one base, you can set the handset to search
automatically the available base, or you can select manually which base the handset should connect to (for example,
if you have one base with an answering machine, you can tell the handset to connect that base to check messages).
Note: To conrm how many bases the handset is registered to, open the SELECT BASE submenu (follow the step
1 of Selecting the base on page 1
4). Press [ ] to close the list and return to standby.
Registering the handset to another base
Make sure the handset battery is fully charged.
To register a handset to DECT 6015, DECT 6035 or DECT Elite 9035 base:
Disconnect the base AC adapter. Then press and hold [nd hs] or [nd] while you reconnect the adapter.
Keep pressing [nd hs] or [nd] until the charge LED starts to blink.
On the handset, press [Select/menu]. Select the REGISTER BASE menu. HANDSET REGISTERING will
appear in the display. (After step 2, you have thirty seconds to complete this step 3 before the system returns to
standby.)
Wait approximately thirty seconds. “REGISTRATION COMPLETE” will be displayed to indicate the handset has
been registered to the base and a handset ID will be automatically assigned.
If the display shows REGISTRATION FAILED, repeat the process again.
4)
1)
2)
•
3)
4)
DECT ELITE OM.indb 13 13/3/08 3:17:49 PM