Uniden DECT 2035 Series Telephone User Manual


  Open as PDF
of 24
 
15
Redialing a Number
Toredialoneofthelastvenumbersdialedonthishandset,
press REDIAL/PAUSE. This opens the redial list. Use and
tondthenumberyouwanttodial,andpressTALK/FLASH or
in standby, or press MENU/SELECT during a call.
Muting the Ringer (One Call Only)
Whilethehandsetisringing,press /MUTE or END to mute
the ringer for this call. The phone will ring again on the next call.
(The handset must be off the cradle to mute the ringer.)
Muting the Microphone
To mute the microphone so the caller can't hear you, press
/MUTE during a call. Mute On and appear in the display.
Press /MUTE again to cancel muting.
Privacy Mode
To prevent other stations from interrupting a call, press
MENU/SELECT during a call. Move the cursor to Call Privacy,
and then press MENU/SELECT. Privacy Mode On and appear
inthedisplay.Repeattheproceduretoturnoffprivacymode.
Adjusting the Audio Tone
Ifyouaren'tsatisedwithyourphone'saudioquality,youcan
adjusttheAudioToneoftheearpiece.Whileonacall,press
MENU/SELECT. Move the cursor to select Audio Tone, and
then press MENU/SELECT. Move the cursor to select desired
audio tone options: High Tone, Natural Tone, or Low Tone. (The
default setting, Natural Tone, is recommended for hearing aid
users.)PressMENU/SELECTtoconrm.Aftertwoseconds,the
displayed audio tone is set, and the display returns to normal.
Audio tone adjustments only apply to the earpiece, not the
speakerphone.
 previous next