Uniden D2998-2 Telephone User Manual


  Open as PDF
of 28
 
4 - English
Connect the Power and Telephone Cords
1. ConnectthebaseACadaptertothepowerjackandthetelephonecordto
the
TEL LINE
jack.Routethecordsasshownbelow:
For desktop use For wall mount use
2. PlugtheACadapterintoastandard120VACpoweroutlet,andconnect
thetelephonecordtoastandardtelephonewalljack.
3. Ifyouaremountingthephoneonthewall,placethemountingslotsoverthe
pinsonthewallplate,andslidethebasedowntolockitintoplace.
Test the Connection
Pickupthecordedhandsetfromthebase.Youshouldhearadialtoneandthe
displayonthebaseshouldsay
Talk
.Whenyougetadialtone,makeaquick
testcall.
If... Try...
the display says
Check Tel Line
or you
don't hear a dial tone
checking the connection between the base
and the phone jack.
you keep hearing a dial tone changing to pulse dialing.
Changing from Tone to Pulse Dialing
Yourphoneusestonedialingbydefault.Ifyourphonecompanyusespulse
dialing,youneedtochangeyourphone’sdialmode.
1. Press
select/menu
andselect
Global Setup
(seep.10forusingthemenus).
2. Select
Dial mode
,then
Pulse
.You'llhearaconfirmationtone.
TosendDTMFtonesduringacall(e.g.,foranautomatedresponsesystem),
press
totemporarilyswitchtotonedialing.Whenyouhangup,thephone
automaticallyreturnstopulsedialing.
 previous next