Uniden D1789-2 Telephone User Manual


  Open as PDF
of 28
 
4 - English
For desktop use For wall mount use
WALL
DESK
DESK
WALL
WALL
DESK
WALL
DESK
2. PlugtheACadapterintoastandard120VACpoweroutlet,andconnectthetelephonecord
toastandardtelephonewalljack.
3. Ifyouaremountingthephoneonthewall,placethemountingslotsoverthepinsonthewall
plate;slidethebasedowntolockitintoplace.
Test the Connection
Pickupthecordedhandsetfromthebase.Youshouldhearadialtoneandthedisplayonthe
baseshouldsay
Talk
.Whenyougetadialtone,makeaquicktestcall.
If... Try...
the display says
Check TEL Line
or you
don’t hear a dial tone
checking the connection between the base
and the phone jack.
you keep hearing a dial tone changing to pulse dialing.
Changing to Pulse Dialing
Yourphoneusestonedialingbydefault.Ifyourphonecompanyusespulsedialing,youneedto
changeyourphone’sdialmode.
1. Press
Menu
onthebaseor
Menu/select
fromthecordlesshandsetandchoose
Global Setup
.
2. Select
Dial Mode
then
Pulse
.You’llhearaconfirmationtone.
TosendDTMFtonesduringacall(e.g.,foranautomatedresponsesystem),press
*
to
temporarilyswitchtotonedialing.Whenyouhangup,thephoneautomaticallyreturnstopulse
dialing.
SET UP THE ACCESSORY HANDSETS
Install and Charge the Battery
1. Unpackallhandsets,batterypacks,andbatterycovers.
Ifyouneedtoremoveacover,pressinonthenotchandslide
thecoverdownandoff.
2. Lineupthebatteryconnectorwiththejackinsidethehandset;
theconnectoronlyfitsoneway.
3. Pushtheconnectorinuntilitclicksintoplace;tuggentlyonthewirestomakesurethe
batteryissecurelyconnected.
4. Replacethebatterycoverandslideitintoplace.
Connect the Charger
1. UseanACadaptertoconnectthepowerjackoneachchargertoaregularindoor(120VAC)
poweroutlet.
 previous next