Uniden D1680-2 Cordless Telephone User Manual


 
16
During the greeting or beeps, press
0
and immediately enter your
security code. If you enter it incorrectly 3 times, the system hangs up
and returns to standby.
The system announces the time, the number
of messages in memory, and a help prompt.
It beeps to let you know it's waiting for a
command.
When you hear beeping, enter a 2-digit
command from the chart.
If you don't press any keys for 15
seconds, the system hangs up and
return to standby.
IMPORTANT INFORMATION
Solving Problems
If you have any trouble with your phone, check this section first. If you
need help, call our Customer Care Line listed on the front cover.
General problems Possible solutions
No handsets can make or
receive calls.
Check the telephone cord connection.
Disconnect the base AC adapter for a few
minutes; then reconnect it.
A handset can’t make or
receive calls.
Move the handset closer to the base.
A handset can make calls,
but it won’t ring.
Make sure the ringer is turned on.
Make sure Silent Mode is turned off (see p. 10).
A handset is not working.
Charge the battery for 15-20 hours.
Check the battery connection.
The phone keeps ringing
when I answer on an
extension.
You may have to change the line mode.
Contact Customer Service for instructions.
Audio issues Possible solutions
Callers sound
weak or soft.
Move the handset closer to the base.
Keep the handset’s battery fully charged.
Increase the earpiece volume.
2.
3.
4.
01 Repeat message
02 Play message
03 Skip message
04 Delete message
05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts
01 Repeat message
02 Play message
03 Skip message
04 Delete message
05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts