Filter
Top Products
10 - English
Conference Calling
x When an outside call comes in, two handsets can join in a conference call
with the outside caller.
x To join a call that’s already in progress, just press
TaLk/fLash
or
spEakEr
.
x To leave the conference call, hang up normally; the other handset remains
connected to the call.
Privacy Mode
To activate privacy mode on a call in progress, press
MENu/sELEcT
twice. As
long as privacy mode is on, you’ll see a
in the display, and no other handsets
can join your call. Privacy mode turns off automatically when you hang up;
you can also turn it off by pressing
MENu/sELEcT
twice.
Using a Voice Mail Service
x If you subscribe to a voice mail service, your phone can notify you when
you have a new message waiting. This feature supports Frequency-Shift
Keying (FSK) message notification. Contact your voice mail provider for
more information.
x When you have new messages, the
sTaTus
LED on the handset blinks, and
the display shows a message icon.
x After you listen to your messages, the voice message icon turns off. If it
doesn’t, you can reset it. With the phone in standby, open the menu and
select Global Setup; select VMWI Reset, then select Yes.
USING THE ANSWERING SYSTEM
Answering System Opons (
Answering Setup
)
You can set or change the answering system options from any handset. Just
open the menu and select Answering Setup. Select one of the following:
Menu Option What it does
Security Code
Enter a 2-digit PIN so you can access your answering system
from any touch-tone phone (see p. 13).
Ring Time
Set the number of rings (2, 4, or 6) before the system
answers (see p. 13 about Toll Saver).
Record Time
Set the amount of time (1 or 4 minutes) callers have to leave
a message. The system records up to 12 minutes 30 seconds
of messages. Choose Announce Only if you don't want the
system to let callers to leave a message.
Message Alert
Have the base beep every 15 seconds when you have a new
message. The alert stops after you listen to all your new
messages or if you press any key on the base.
Ans. Language Change the language of the system's voice prompts.