Filter
Top Products
7
One-touch RocketDial
Your phone is equipped with “One-touch RocketDial” for instant dialing.
It is used to dial the phone number stored in the one-touch RocketDial
location (See “Storing a Phone Number in Memory Dial”).
To instantly dial the phone number stored in the one-touch RocketDial
location, simply press the
RocketDial key in standby mode. (There is
no need to press the
talk key. The phone will automatically dial). If you
press the
RocketDial key and a phone number is not stored in the
one-touch RocketDial location, an error tone will sound and the phone
will not dial.
Chain Dialing
The memory locations on the handset are not limited to phone numbers. You can also store
a group of numbers (up to 20 digits) that you need to enter once your call connects. This is
referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, and are
prompted to enter the account number, simply press the
m/mem
key and the location number
where the special number has been stored.
Store your special number in memory as you would store a phone number (Refer to
“Storing a Phone Number in Memory Dial”).
Erasing a Stored Number from Memory
1) Press the m/mem key twice in standby mode.
2) Press the
RocketDial key or the memory location (0-9). A tone indicates that the stored
number is erased from memory.
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and the base
unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. In the rare
situation that you suspect another cordless telephone is using the same security code, you
can change the code.
1) Remove the handset from the base unit. Press and hold the
find hs key on the base.
2) While holding the
find hs key, place the handset in the base unit. Leave the handset in
the base for more than 3 seconds. A new random security code is set.
NOTE: If the handset battery pack is completely discharged or the battery pack is removed,
the digital security code will be lost. If this happens, a new security code is set
automatically next time the battery pack is charged.
EXP971 9/10/03 5:52 PM Page 7