Filter
Top Products
34
Additional Information
IntercomPower source/battery
Remedy
• Make sure you follow the procedure in storing the
number correctly (page 20).
• When the handset is in use, you cannot store a memory
dialing number on the base phone.
• Replace the handset to the base phone for a while.
• You pressed the number button to which no phone
number has been stored.
• Store a correct number (page 20).
• The handset may be engaged in conversation.
• The battery may be weak. Charge the battery for 15-20
hours (page 11).
• Move the handset closer to the base phone.
• Place the base phone away from noise sources
(page 8).
• Wipe the charge terminals of the base phone and the
handset with a soft cloth for better contact of the
charge terminals.
• Make sure the handset is placed on the base phone
properly.
• The battery pack was charged for 15-20 hours (due to
power failure, etc.).
• The usage life of the battery has expired and needs
replacement.
Symptom
You cannot store a memory
dialing number.
You cannot make a memory
dialing call.
Memory dialing is incorrect.
The handset does not ring
when calling from the base
phone.
The CHARGE LED does not
light up when you place the
handset to charge.
The battery duration is short.
Memory dialing
Maintenance
• Clean the cabinets with a soft cloth slightly moistened with water or a mild detergent
solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol
or benzine as they may damage the finish of the cabinet.
• If the charge terminals of the base phone and handset are soiled, wipe them with a soft
cloth.
If you have any questions or problems concerning your phone, please call our customer
hotline at 1-800-297-1023.
EXP2905 Final-10/09 10/9/01 11:23 AM Page 34