Filter
Top Products
10
Getting Started
DIAL MODE switch
Step 2: Setting up the base phone (continued)
Notes
• Use only the supplied AD-314 AC power adapter.
Do not use any other AC power adapter.
• Connect the AC power adapter to a continuous
power supply.
• Place the base phone close to the AC outlet so that
you can unplug the AC power adapter easily.
Tip
If your telephone outlet is not modular, contact your
telephone service company for assistance.
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
Polarity of the plug
Modular
Depending on your dialing system, set the DIAL MODE switch as
follows:
If your dialing system is Set the switch to
Tone TONE
Pulse PULSE
If you aren’t sure of your dialing system
Make a trial call with the DIAL MODE switch set to TONE.
If the call connects, leave the switch as is; otherwise, set to PULSE.
EXP2905 Final-10/09 10/9/01 11:23 AM Page 10