Filter
Top Products
MEMORY DIALING
MEMORY DIALING [ 21]
Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses. Your cord-
less telephone stores up to 10 names/numbers in the handset.
1) Press and hold mem until ¨
Memory Store¨ is displayed.
2) Enter a number (0 - 9) or press or to select the
memory location where you would like to store
the number.
3) Press select. The following screen appears, and a cursor
flashes indicating that the display is ready for the name to
be entered.
If this screen appears, the selected memory location is
already stored. Then you must either edit the entry in
this location, delete the entry in this location, or select
¨
Go Back¨ to choose another location.
4) To enter a name (up to 14 characters), use the number keys.
• See the "Steps for Entering Names and Special Characters". (See pages 23-24)
• Use #/ and
*
/tone/ to move the cursor to the desired location.
• Use delete/ch to delete characters as needed.
• Press and hold delete/ch to delete all the characters.
• If a name is not required, go to step 5.
Memory Store
1
2
Store Name
Edit Memory 1
Delete Memory 1
Go Back
• In memory dialing
operation, you must
press a key within 30
seconds or the phone
will return to standby.
If you return the
handset to the base,
the phone will return
to standby also.
• You have 30 seconds
after pressing mem to
enter the number you
wish to store.
Otherwise, an error
tone will sound.
EXI386M 8/11/03 5:38 PM Page 21