Filter
Top Products
BASICS
BASICS [ 19]
Redial
The redial/p key redials the last number dialed. The redialed number can be up to 32
digits long.
Tone Dialing Switch over
Some telephone companies use equipment that requires
pulse dialing (sometimes referred to as rotary dialing). If
you need to enter tone dialing digits, you can switch over
to tone dialing during the call. For example you can call
your bank’s telephone teller system, then switch over to
tone dialing to enter your bank account number and make menu selections.
Make your call with the pulse dialing mode. Once your call connects, press
*
/tone/ to enter tone dialing mode. Any digits entered will be sent in tone
dialing mode. Once the call ends, the tone mode is canceled, and pulse dialing mode
resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will terminate
within 5 minutes.
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number
can be stored in a
memory location. This
is referred to as Chain
Dialing (See page 26.)
EXI386M 8/11/03 5:38 PM Page 19