Uniden FP103 Telephone User Manual


 
OPERATION
Redial
If you need to call the last number dialed, simply pick up the handset and press the redial
(pause) button. The telephone will automatically redial the last number dialed.
Flash - Call Waiting
Adjusting Volume Controls
Ringer volume:
You can adjust the ringer volume by moving the ringer volume switch, located at the
rear of the telephone base, to the desired off/lo/hi position.
Handset volume:
While on a call, adjust the handset volume switch, located at the side of the telephone
base, to the desired normal /mid/ hi level.
Placing a Call on Mute
To allow you to privately speak with another person while you have a caller on the line,
press the mute button. This will turn off the handset microphone, preventing any private
conversation from being heard by the caller. The mute light will turn on while the phone
is in this mute mode. The screen will display .
Press the mute button again to resume the telephone conversation with the calling party.
Placing a Call on Hold
There are two options:
1. If you need to leave the phone but wish to retain the caller on the line - press the hold
button and hang up. The hold light will turn on, the display will show CALL ON
HOLD . To begin conversation again, pick up the handset or pick up an extension
phone (if available), the hold will automatically release.
-or-
2. Press the hold button and do not hang up the handset. The hold light will turn on,
the screen will display CALL ON HOLD . When you want to talk to the caller
again, press the hold button again. You do not need to hang up the phone.
Music on Hold
When a call is on hold, the FP103 will play a popular melody to reassure your caller that
the call has not been disconnected.
If the Call Waiting tone sounds while you are on a call -
New Zealand: Press the flash button to switch between callers.
Australia: Press flash then 2 to switch between callers.
MIC MUTE
]
]
]
]
]
]
6