Filter
Top Products
TROUBLESHOOTING
Blank or faint screen
Check the line cord.
Connect telephone cord.
Replace batteries.
Caller ID will not work properly
Call your telephone company to verify that your caller ID service is active.
Phone will not ring
You may have too many communication devices connected to a single line. A
communication device can be a phone, a modem or fax machine. Disconnect some
devices.
No dial tone
Verify that you are using the correct line cord and that it is plugged in correctly.
No data sent
If you have an answering machine or fax connected to this phone, ensure it is set to
answer after at least two rings.
You have answered the call before two rings.
Contact your telephone company if the problem continues for more than 24 hours.
The telephone company may be experiencing a temporary line fault.
No response on LCD display
If you have experienced a power failure when using the optional AC adaptor, the batteries
for memory backup may have become weak or dead. If the power is restored and the
display screen does not respond then you need to replace the batteries.
Please refer to our website for further information and frequently asked questions.
New Zealand -
www.uniden.co.nz
Australia -
www.uniden.com.au
8