Filter
Top Products
Troubleshooting
Troubleshooting [68]
www.uniden.com
Severe noise interference.
•Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones,
alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances.
•Move to another location or turn off the source of interference.
The Caller ID does not display.
•The call was placed through a switchboard.
•Call your local telephone company to verify your Caller ID service is working properly or if there has
been a temporary service interruption.
You cannot register the
handset at the base.
•Charge the battery pack in the handset for 15 hours.
•Change the Digital Security Code (see page 15).
The handset does not
communicate with other
handsets.
•Change the Digital Security Code (see page 15).
•Make sure that you have registered all handsets.
An extra handset is not able to
join the conversation.
•Make sure there are not 2 handsets already using the conference feature.
•Make sure that another handset is not in privacy mode.
Room Monitor feature does not
work.
•Make sure to place the handset(s) within the range of the base.
Symptom Suggestion