Filter
Top Products
Using Your Phone
[47] Using Your Phone
www.uniden.com
Tone Dialing Switch Over
If your telephone company uses pulse dialing, you can
switch over to tone dialing after the call connects. This
feature is useful when you need tone dialing to use any
automated menu systems, such as automated banking,
prescription refill lines, customer support menus, etc.
If your phone is set to pulse dialing mode, make your call
normally. Once your call connects, press
*
/tone on the
handset or base. Any digits you enter from then on will
be sent as tone digits. When this particular call ends, the phone automatically returns
to pulse dialing mode.
Privacy Mode
Privacy mode prevents interruption from other registered
handsets or the base. This works only when the phone is in use.
While on a call, press the OPTIONS soft key on the handset or the
base. Use the joystick or the up/down key to select
Call Privacy
.
Privacy Mode On
and appear in the display. To exit Privacy
Mode, use the same procedure.
Privacy Mode Off
appears.
Do Not Disturb (DND)
The do not disturb feature (DND) allows you to mute the ringer of the base and any
registered handsets at the same time. The phone must be in standby mode. Press
and hold dnd on the base. You will hear a confirmation tone, and the dnd LED
illuminates. To cancel the DND feature, press dnd again. You can also mute the
ringer tone while the phone is ringing by pressing dnd on the base.
126+105126+105
6CNM
2TKXCE[/QFG1P