Filter
Top Products
4
Charging the BT108 Charging the BT109
Connect the adapter to the power
connector on the top of the headset,
then plug it into a standard 120 volt
AC (regular indoor) power outlet.
Connect either adapter to the power connector on the top of
the headset. Connect the AC adapter to a standard 120 volt
AC (regular indoor) power outlet. Connect the DC adapter to
a standard 12 volt DC (regular automobile) power outlet.
Pair the headset to your Bluetooth phone
Pairing is like “introducing” two Bluetooth devices and giving them
permission to connect to each other. If you want to use the headset with
more than one phone, you need to pair it with each phone separately.
Once a phone and the headset are paired, they can connect automatically
whenever they detect each other.
Make sure the headset is powered o and the power adapter is not
connected (you can’t use the headset while it’s charging).
Press and hold Power until the LED ashes alternating red and blue. The
headset is in pairing mode and should be visible to other Bluetooth
devices.
1.
2.