Filter
Top Products
44
Changing the digital security code
The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set.
(See page 4.)
In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.
1 Remove the handset from the base
unit. Press .
2 While the handset is producing the
paging sound, hold
while placing the handset in the base
unit. The paging tone stops.
Leave the handset on the base for at
least 3 seconds. A random new
security code is set.
Note
If the handset battery pack is completely discharged or the battery pack removed, the
digital security code will be lost. If this happens, a new security code is set
automatically the next time the battery pack is charged.
EXI 8966 7/25/00 17:44 Page 44