Filter
Top Products
27
Memory editing
(continued)
7 Use the number keypad, , or to enter the phone number.
The phone number cannot exceed 20 digits. (See page 21.)
When the phone number will not be edited, skip this step.
8 Press .
The handset beeps and displays the
confirmation screen. The memory
storage is complete.
For example, if you store a name
and number into memory location
number 01, the display shows
“
Memory01 stored”.
After about 2 seconds, “
Memory Store”
is displayed.
9 Press to return to standby mode.
Note
To edit stored numbers in the base, simply overwrite the previous numbers.
(See “Memory Storing with the base” section on page 22.)
EXI 8966 7/25/00 17:42 Page 27