Filter
Top Products
INSTALLING THE
PHONE
INSTALLING THE PHONE [ 9]www.uniden.com
• Connect the AC adapter to a continuous power supply.
• Place each cradle close to the AC outlet to avoid long extension cords.
C. Connect the Main Base and Charging Cradle, and Charge the Handsets
1) Connect each AC adapter to the DC IN 9V
jack and to each standard 120V AC wall
outlet.
2) Place one handset in the main base and
the other in the charging cradle with the
keypad facing forward.
3) Make sure that the
charge/in use LED and
charge LED illuminate. If the LED does not
illuminate, check to see that the AC
adapter is plugged in and that the handset makes good
contact with the cradle's charging contacts.
• Use only the supplied
AD-314 AC adapter
for the main base and
AD-310 or AD-1010
for the charging
cradle.
Do not use any other
AC adapter.
• Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
4) Charge your handsets at least 15-20 hours before
plugging the phone line.