Filter
Top Products
2) Use the : and ; keys to move the cursor to the selection that you
would like to change. Press the
select
key to toggle between On and
Off for Autotalk and CIDCW. Press
select
and use the number
keypad to enter or change the area code, then press
select
again. (You hear a
confirmation tone indicating the area code has been changed.)
3) After you have made your selections, press
call id
and return the
handset to the base. The
status
LED flashes, indicating that your
setup changes are now effective.
▼
Screening Your Calls
Caller ID allows you to review caller
information before you answer your
phone. When the phone rings, the
display shows the date, time, call count,
name, and phone number of the caller.
If your Caller ID service is number only,
then the name does not appear on the second line.
If a name or number is not available, the display will show a
message such as
Incomplete Data, Private Number,
Private Name, etc.
▼
Using CIDCW (Caller ID on Call Waiting)
1) During a call when you hear the
Caller ID tone, check the handset
for the name and number of the
incoming caller.
2) Press
flash
to accept the incoming call. See page 14 for
additional information.
▼
Reviewing Caller ID Numbers
Your phone stores the most recent 30 numbers in Caller ID memory. If
the memory is full, a new call replaces the oldest number. To review
your Caller ID numbers, follow the steps below.
20
NOTE
If you have no Caller ID
messages, then the total is
shown as 00.
NOTE
If you have no New Caller ID
Messages, then the “New”
display is blank. Only the
“Total” display appears.
NOTE
Once a Caller ID message
has been viewed, it is no
longer considered a
new message.
Talk 0:00
Schlitz Kaysie
817-555-1212
12/21 12:30PM 03
Schlitz Kaysie
817-555-1212
H:...evised for reprint EXI 7960.vp
Wed Aug 18 12:37:53 1999
Color profile: Disabled
Composite Default screen