Ultratec CapTel Telephone User Manual


 
4
Activate 2-Line Menu
1.
With the handset hung up, press
the key until you see 2Line
Mode?. Press the button next to
ON to turn 2-line capabilities on.
Press EXIT to leave the menu.
Note: If 2Line Mode? does not appear in your CapTel menu, contact
CapTel Customer Service.
2. Attach the desktop/wall footplate, making sure the larger side is
along the top edge of the CapTel. (For wall mount installation, refer
to the CapTel user manual.)
NOTE: If you are in an office setting, and your 1st line requires a number
to reach an outside line, you will need to manually dial a dialing prefix
(such as “9”) before placing your call. If your 2nd line also requires a
dialing prefix to get an outside line, make sure you’ve entered one in
the CapTel menu as well. See the CapTel user manual for details.
You are now ready to begin making and receiving calls using the
2-line capabilities.
PLACING A CALL WITH CAPTIONS
1. Verify that the Caption feature is ON. The red light over the
button should be lit. If the light is not on, turn on the feature by
pressing the button.
2. Pick up the handset.
3. You may begin speaking to the person as soon as you hear them
answer, or when you see captions.
NOTE: If you are in an office setting, and your 1st line requires a number
to reach an outside line, you will need to manually dial a dialing prefix
(such as “9”) before placing your call. If your 2nd line also requires a
dialing prefix to get an outside line, make sure you’ve entered one in
the CapTel menu as well. See the CapTel user manual for details.
CAPTION
CAPTION
MENU