Filter
Top Products
QUICK
REFERENCE
GUIDE
Read the Owner’s Manual for details.
CALLER ID CORDLESS TELEPHONE
FT-8801A
UCZZ69338BZ RC012154 Printed in China
SETTING UP THE BASE UNIT
CHARGING THE BATTERY PACK
9
0
0
M
H
z
Red
Black
IN USE/
CHARGE
LED
Charging contacts
SETTING / USING THE PHONE
1
Press
FUNC
, then press
3
.
2
Press
SELECT
and enter a 3-digit area code.
3
Press
SELECT
, then press
FUNC
.
1
Remove the battery cover by sliding it down.
2
Plug the battery pack cord into its socket, observing
the correct polarity.
3
Place the battery pack . Then close the battery
compartment cover.
4
Place the handset on the base unit. You can place
the handset with the dialpad facing up or down.
IMPORTANT
Charge the battery pack for at least 12 to 16 hours.
CALLER ID SERVICE
1
Press
CID
, then press or to display the number you want to dial.
2
Press
TALK
, then displayed number will be dialed.
Deleting Caller ID Data
Storing Caller ID Data to Speed-Dial Memory
Caller ID on Call Waiting
1
Press
CID
, then press or to display the number you want to store into
Speed-dial memory.
2
Press
MEM
, then press , or enter a memory location number.
3
Press
SELECT
. A confirmation beep sounds and the Caller ID data is stored.
Press
CID
to return to standby mode.
1
Press
CID
, then press or to display the Caller ID number you want to
delete from the memory.
2
Press
DELETE
, then press or to select Yes or No.
3
Press
SELECT
or
DELETE
.
4
Press
CID
to return to standby mode.
For more detailed instructions and examples, please refer to the owner’s manual.
Fasten the AC
adaptor cord.
Raise the antenna to vertical
position.
Telephone Line Cord
AC Adaptor
Single-Line
Telephone Jack
(RJ11C)
Power Outlet
(AC 120V, 60Hz)
,
CID
3
1
SELECT
DELETE
FLASH
TALK
MEM
1
Before answering a call, check to see that the caller’s name and telephone number
are displayed on the LCD. To switch to the other line, press
FLASH
.
The first caller is put on hold.
2
To return to the first caller, press
FLASH
again.
Note: For long distance calls, you need a prefix “1” and the area code.
Press
L.D./1
and
LOCAL/3
to add or cancel “1” and the area code
before pressing
TALK
.
NOTE: Plug the AC adaptor firmly into the base unit and the AC 120V outlet.
1
Dial the phone number .
2
Press
TALK
.
3
Press
TALK
to hang up .
Press
TALK
and speak.
NOTE: To indicate Caller ID data, let the
phone ring twice before you answer the call.
1
Press and hold
FLASH
until you hear a confirmation tone.
2
To set the dial mode for pulse dialing, press
#
/
PULSE
. Or to set the dial
mode for tone dialing press
TONE/
.
A confirmation tone sounds to indicate the setting is complete.
Depending on your dialing system, set the mode as follows:
Setting Up Caller ID Making a Call with Caller ID Data
To use Caller ID/ Caller ID on Call Waiting features, you must subscribe to both Caller
ID / Caller ID on Call Waiting services provided by your local telephone company.
Setting The Dial Mode
Area Code
Answering a Call
Making a Call
Dial Mode:Pulse
Tone - Press
Pulse- Press #
Tone Dialing
Dial Mode:Tone
Tone - Press
Pulse- Press #
Pulse Dialing
TONE/
3
SELECT
FUNC
FLASH
TALK
TONE/
#
PULSE
/
#
/
PULSE