Filter
Top Products
Strata CIX DP5000-series Telephone Quick Reference Guide 11/07 9
One Touch
³ To store a number on the One Touch button
1. Dial
#9876.
2. Press a
One Touch button.
3. Enter the number to be stored.
4. Press the
One Touch button again.
Note One Touch buttons must be programmed on a
Programmable Feature Button.
Paging
³ To make an All Call Page
1. With the handset off-hook, press
All Call Page. This pages
all phones in the All Call Page Group, and may page external
speakers (depends on programming).
2. Make your announcement, then hang up.
Speed Dial
³ To store a Station Speed Dial Number
1. Dial #9876.
2. Press
Spdial.
3. Enter a Speed Dial Code (100~199).
4. Enter the number to be stored (32 digits max.).
5. Press
Spdial button to store the entry.
6. Repeat steps 2~5 to add more speed dial numbers.
7. To end programming session, lift and replace the handset.
³ To clear a number from a Station Speed Dial code
³ Repeat the previous procedure skipping Step 4.
³ To make a call using Speed Dial
1. Lift the handset. Press
Spdial, then dial the Speed Dial
Number.
2. Access a outside line (if necessary).
Note You may need to lift the handset and access an outside
line before pressing
Spdial (depending on your telephone
setup).
CAUTION! Do not use cleansers that contain benzene, paint
thinner, alcohol or other solvents on the
telephone's rubber feet. The color of the rubber
may transfer to the desk or mounting surface.