Filter
Top Products
10 Topcom Butler E300/Twin/Triple/Quattro
Topcom Butler E300/Twin/Triple/Quattro
7 Caller-ID function (CLIP)
The Topcom Butler E300 displays the telephone numbers of incoming calls. This function is
only possible if you are subscribed to a telephone operator that provides this service. Contact
your telephone provider for more information. When you receive a call, the numbers are
saved in a Call list. This list can hold 20 telephone numbers (each of max. 20 digits). If the
number is longer then 12 digits, you can press the key to show the other digits!
7.1 New calls
When you’ve received a new unanswered call, the CLIP symbol will blink on the display.
7.2 Consulting the Call list
Press the Call Log button . The last received call is shown on the display. If the list is
empty, ‘EMPTY’ is shown on the display. If not, You can see the name, number and date/
time.*
You can scroll from name to number and date time by pressing the button. Use the left
scroll key to scroll to the previous call. Use the button to show the next call Æ You
can leave the Call list by pressing the button.
* Only when the network sends the time/date together with the telephone number!!! On
some networks with caller ID, time and date will not be displayed
7.3 Calling a number from the Call list
Scroll through the Call list until the desired number is shown on the display Æ Press the
Off-hook button . The number will be dialled automatically.
7.4 Erasing a number from the Call list
Scroll through the Call list until the desired number is shown on the display Æ Press the
Menu button and select ‘Delete’ Æ Press OK after the confirmation request to confirm.
7.5 Erasing all numbers from the Call list
You can only erase all numbers from the call list if all are read.
Press the Menu button and select ‘Delete All’ Æ Press OK after the confirmation
request to confirm.
7.6 Store a number from the call log into the phonebook memory
Scroll through the Call list until the desired number is shown on the display Æ Press the Menu
button and select ‘Save’. Æ Edit the name if nessesary and press OK Æ Edit the
number if nessesary and press OK.