Filter
Top Products
Topcom Butler ME300/Twin/Triple/Quattro 7
Topcom Butler E300/Twin/Triple/Quattro
ENGLISH
5.12 Handset confirmation tones
During successfull or unsuccessfull operation the handset will beep. This beep can be
activated/deactivated:
Press Menu button ÆUse the Down button to scroll to ‘Sound’ and press
Æ Use the Up or Down button and select ‘Tones’ Æ Use the Up or Down
button and select ON or OFF and confirm with .
5.13 Key lock
When the keypad is locked, pressing any key will have no effect during standby (except
holding the key).
Press and hold the key Æ
appears on the display and the keypad is locked Æ Press
and hold the key again to un-lock the keypad.
When there is an incoming call, you can still answer the call by pressing the OFF-hook button
. During the call, the keypad functions as normal. When the call is ended, the keypad
will be locked again.
5.14 Auto answer
Auto answer enables you to answer an incoming call by simply picking up the handset from
the charging cradle. You do not need to press a key to answer the call.
Press Menu button ÆUse the Down button to scroll to ‘Settings’ and press
Æ Use the Up or Down button and select ‘Autoanswer’ Æ Select ON or OFF and
press .
5.15 Setting the dialling mode
There are two types of dialling mode:
DTMF/Tone dialling (the most common) (default)
Pulse dialling (for older installations)
To change the mode of dialling:
Press Menu button ÆUse the Down button to scroll to ‘Settings’ and press
Æ Use the Up or Down button and select ‘Dial Mode’ Æ Select ‘Pulse’ or ‘TONE’
you want with the Up or Down key and select .
5.16 Handset name
You can change the name that appears on the sceen (max. 10 characters) during idle stage:
Press Menu button ÆUse the Down button to scroll to ‘Display’ and press
Æ Use the Up or Down button and select ‘Handset Name’ Æ The currect handset
name is shown Æ Delete the character by the Mute -key Æ Use the keypad to enter the
new name Æ Press the Menu/OK button to confirm.